Book a Meeting
PRJ-418 · 3-door wardrobeDesigner order · Sample
Install slot · Thu 10:00Zoho FSM · Sample
Board to fitted wardrobe

Cut list · Sample

Sample cut list for a wardrobe carcass
PartSize (mm)QtyEdge
Side2100 × 56021L
Top, base1164 × 56021L
Shelf570 × 54041L
Shutter2096 × 39734
Back2080 × 11801None

Modular furniture and woodwork · Bengaluru

Furniture manufacturing ERP in Bangalore, from designer's order to fitted wardrobe

Yes, we set up Zoho for furniture and wood manufacturers in and around Bangalore. Orders from interior designers land in Zoho CRM, boards, laminates and hardware sit in Zoho Inventory, a Creator app turns each design into a cut list and bill of materials, and Zoho FSM books the installation crew at the apartment.

  • Zoho Advanced Partner
  • 300+ projects delivered since 2021
  • Install crews trained in Kannada

We reply within 1 business hour · No obligation

300+
Zoho implementations finished
Since 2021
Implementing the Zoho suite
3 offices
Bangalore, Coimbatore, Kochi
ZohoAdvancedPartner

Also Zoho Creator Registered, Zoho Catalyst, AWS and Shopify Partner

Fit check

Which furniture businesses suit Zoho, and which need more?

If you build to order and install at site, Zoho fits well once the cut-list app is in place. If you run a fully automated panel line driven by nesting software, Zoho runs orders, stock and money while the line keeps its own software.

Fits well

Modular kitchens and wardrobes

Designer or homeowner orders, panel cutting, edge banding, hardware kits and installation in apartments across the city.

Fits well

Office and hospitality fit-outs

Workstations, storage and reception units for offices and hotels, with site measurement, phased delivery and handover lists.

Fits with a Creator build

Solid wood and carved furniture

Timber by cubic measure, seasoning, carving and polish. Timber conversion and yield need custom forms, since Zoho counts stock in fixed units.

Keep your line software

High-volume flat-pack plants

Machine-driven nesting and line balancing stay in the line's own software. Zoho takes the orders, stock and billing and exchanges data with it.

How a wardrobe is made

What happens between a full board and a fitted wardrobe?

Six stages: three in the factory, one in packing and two at the customer's home. Scroll through them; each picture grows into place as you reach it, and each stage names the Zoho app or custom app that keeps the record. Codes and sizes are sample data.

  1. Board stock
  2. Panel cutting
  3. Edge banding
  4. Boring and hardware
  5. Flat-pack
  6. Install at site

Stage 1

Boards, laminates and edge tape in the store

Plywood, MDF and particle board arrive by thickness and grade, with laminates and edge tape matched by shade code. Zoho Inventory holds each as an item, so the store knows how many full sheets and usable offcuts of each kind are on the rack.

  • Zoho Inventory
  • Zoho Books

Stage 2

The cut list becomes a cutting pattern

The Creator app turns the design's dimensions into a cut list and a board count. If you use nesting software for the panel saw, the cut list is exported to it and the sheets actually used come back; Zoho does not optimise cutting patterns on its own.

  • Zoho Creator (custom)

Stage 3

Edges sealed in the matching shade

Each visible edge gets tape in the laminate's shade. Tape is consumed in metres against the project, so the store sees when a shade is running low before a large kitchen order stops the edge bander.

  • Zoho Inventory
  • Zoho Creator (custom)

Stage 4

Holes bored, hardware kitted

Hinges, channels, handles and connectors are picked as a kit per cabinet from the BOM. Kitting in Zoho Inventory reserves the hardware for that project, so a missing soft-close hinge shows up in the factory and not at the customer's door.

  • Zoho Inventory

Stage 5

Panels packed and labelled by room

Panels are packed flat and each box is labelled with the project, room and box count. A packing list from Creator travels with the truck, and the install crew checks it on arrival before anyone signs the delivery note.

  • Zoho Creator (custom)
  • Zoho Books

Stage 6

The crew fits it, and the customer signs off

Zoho FSM schedules the crew, the carpenter gets the job on the FSM mobile app with the drawing and packing list, photos go up from site, and the customer signs the handover on the phone. Snags become follow-up visits in the same app.

  • Zoho FSM
  • Zoho Books
  • Zoho CRM

Order channels

How do orders from designers, builders and homeowners differ in Zoho?

Each source brings a different paper trail: a designer sends drawings and expects trade pricing, a builder sends a schedule for many flats, a homeowner wants a quote and a visit. Choose a source on the rail to slide its setup into view.

Interior designers

Designers in Indiranagar, Koramangala and HSR send drawings for a client's flat and expect trade rates and a firm delivery week. Each designer is an account in Zoho CRM with their own price list, and every project carries the drawing revision the factory built from.

  • Designer price lists in Books
  • Drawing revisions attached to the deal
  • Commission or referral tracking

Builders and developers

A builder's order covers many flats with the same kitchen and wardrobe set, delivered tower by tower in projects along Sarjapur Road, Whitefield or North Bengaluru. One master BOM is repeated per flat, and billing follows the milestones in the contract.

  • One BOM, many flats
  • Tower and floor-wise delivery
  • Milestone invoices with retention

Homeowners direct

Enquiries come from your website, a showroom visit or a referral. The measure visit is booked in FSM, the quote goes from CRM, and the advance payment link goes out with the quote so the project can be released to the factory.

  • Website and showroom leads
  • Measure visit as an FSM job
  • Advance before release

Offices and co-working fit-outs

Fit-out contractors order workstations, pedestals and storage for tech parks around Outer Ring Road and Whitefield. Quantities are larger, layouts change late, and installation often happens at night or on weekends.

  • Bulk BOM by layout
  • Night and weekend install slots
  • Snag lists per floor

Showroom and dealers

Some units sell standard designs through their own showroom or dealers across Karnataka. Those are stock items rather than projects, so the setup leans on Zoho Inventory and dealer price lists more than on the cut-list app.

  • Standard designs as stock items
  • Dealer orders and credit limits
  • Showroom versus factory stock

Bill of materials

What goes into one wardrobe, down to the last hinge?

A modular unit is a tree: the unit, its carcass and shutters, then boards, edge tape and hardware. Open the branches to see a sample tree the Creator app builds from the design's sizes.

Zoho Inventory supports composite items and bundles; the multi-level tree with sizes and edge rules is the custom Creator part, labelled as custom in your scope.

3-door wardrobe, 1200 × 2100 × 600Sample unit
Carcass18 mm BWP, white inside
  • Side panel 2100 × 560 × 2
  • Top and base 1164 × 560 × 2
  • Shelf 570 × 540 × 4
  • Back 2080 × 1180, 8 mm × 1
  • Edge tape 1 mm, white 14.2 m
Shutters18 mm, laminate finish
  • Shutter 2096 × 397 × 3
  • Laminate 1 mm, shade sample L-212 2 sheets
  • Edge tape 2 mm, shade matched 15.0 m
Hardware kitReserved per project
  • Soft-close hinge × 9
  • Handle, 160 mm × 3
  • Hanging rod with brackets × 1
  • Shelf supports × 16
  • Cam connectors × 12
PackingBy room
  • Corrugated sheet and corners 4 boxes
  • Packing list label × 4

Options compared

Excel and WhatsApp, Zoho with a cut-list app, or furniture software?

Many Bengaluru units run projects on Excel, Tally and WhatsApp groups. Furniture-specific software brings design and nesting tools but rarely covers sales, service and accounts as well. Zoho covers the business end to end, with a Creator app for the cut list.

Excel with WhatsApp, Zoho with a Creator cut-list app, and furniture design software compared
Point Excel, Tally and WhatsAppThe usual start Zoho with a cut-list appOrder to install in one suiteWhat we would pick Furniture design and nesting softwareFactory-side tools
Designer and homeowner ordersSpread across chatsZoho CRM deals with drawingsNot the focus
Cut list and BOMSheet per projectCreator app from design sizesCore feature
Cutting pattern optimisationNoNo; exchange with nesting softwareCore feature
Boards and hardware stockCounted by handZoho Inventory with project reservationsSometimes
Install crew schedulingPhone callsZoho FSM jobs and mobile appRarely
GST billing and collectionsTallyZoho BooksSeparate system

Honest boundaries

Which jobs run in standard Zoho, which need a custom app, and which stay outside?

Use the toggles to filter the matrix. Every row is a job furniture units typically need covered; the dot shows where it runs in a typical setup.

Where each furniture job runs
JobStandard ZohoCreator buildOutside Zoho
Leads, quotes and advances
Board, laminate and hardware stock
Install and service visits
GST invoices, milestones, e-way bills
Cut list and multi-level BOM from sizes
Offcut register with sizes
Packing list by room and box
3D design and renders
Nesting and saw programmes

Unit types compared

Is the setup different for a modular factory, a solid wood workshop or a Channapatna craft unit?

Quite different. Panels, timber and lacquered wood are counted, costed and sold in their own ways. Pick a unit type for the usual stages, apps and the thing to plan for.

Modular panel factories

Kitchens and wardrobes from plywood or MDF in factories around Hoskote, Bommasandra and Nelamangala, installed in homes across the city.

  1. Design approved
  2. Cut list and BOM
  3. Cut, band, bore
  4. Pack by room
  5. Install and handover

Zoho for furniture makers nationwide

  • Usually fitsCRM, Inventory, Books, FSM and a Creator cut-list app
  • Key setupProject reservations of hardware, packing lists by room
  • Watch forLate design changes after cutting; lock the revision at release

After the handover

How are snags, warranty calls and service visits handled after installation?

As follow-up jobs in Zoho FSM tied to the original project, so the technician sees exactly what was fitted and which hardware went in.

  1. Snag at handoverThe crew logs a loose shutter or a scratched panel with a photo; FSM creates a follow-up visit with the part needed.
  2. Part from the factoryA replacement shutter is cut against the original BOM line, so the shade and size match.
  3. Warranty call months laterThe homeowner calls or messages; the service desk finds the project by phone number and books a visit.
  4. Chargeable serviceOut-of-warranty visits are invoiced from Zoho Books, with the payment link sent the same day.

Licence bill and our fee

What does Zoho cost for a furniture factory with install crews?

You pay Zoho its India list prices for licences, and FSM is priced by appointments a month rather than per crew member. Our work, including the cut-list app, is a fixed price agreed in a signed scope.

Zoho India list prices for one month on yearly billing, GST extra
App and editionPriceBasis
Zoho CRM Standard₹800Per user
Zoho Inventory Premium₹2,299Per organisation
Zoho Books Professional₹1,499Per organisation
Zoho Creator Standard₹480Per user
Zoho FSM Standard₹1,000Up to 60 appointments a month

What moves our fixed price

Design library size. A few standard modules load quickly; hundreds of custom sizes need sizing rules in the app.

Nesting software link. A file exchange is simpler than a live API link.

Crews and areas. More install teams and service zones mean more FSM territories and rules.

Leaving Tally and Excel. Open projects, advances and stock come across and are checked with your accountant.

Prices checked on Zoho's India pricing in November 2026, billed by Zoho and open to revision. If you want a written BRD before deciding, we quote it up front.

Connections

Which design, factory and payment tools can link to Zoho?

The Zoho apps link to each other natively. Design and nesting software link through file exchange or an API where one exists, and we test that before pricing it.

Zoho FSM mobile app for crews, with photos and customer signature Native
Zoho Sign for design approval before the factory release Native
GST e-invoice and e-way bill straight from Zoho Books Native
WhatsApp updates to homeowners on delivery and install day Marketplace
Click-to-call from CRM for supported telephony providers Marketplace
Design software cut-list export into the Creator app Custom
Nesting or panel saw software file exchange per project Custom
Designer portal showing project status, built on Creator Custom

See how we approach links in Zoho integration projects.

Rollout

How do we take a furniture unit live on Zoho?

One finished project is our blueprint: we rebuild it in Zoho from order to handover before touching the rest. Dates are agreed in the signed scope only.

  1. 1Project traceOne recent kitchen or wardrobe traced from drawing to handover with you.
  2. 2Sizing rulesYour carcass, shutter and edge rules written down for the cut-list app.
  3. 3Scope signedApps, Creator build, FSM setup and links priced once.
  4. 4Library loadedModules, boards, laminates and hardware entered with your store keeper.
  5. 5First live projectsNew orders run in Zoho while old ones finish on the old method.
  6. 6Crew and staff trainingFactory, store, sales and crews trained in Kannada, English, Tamil or Malayalam.

Sort your priorities

Which problem should your Zoho rollout solve first?

Swipe through eight problems common in furniture workshops and keep the ones that hurt. Your shortlist becomes a first-phase plan and drops into the enquiry form.

  • Eight cards, one tap each
  • Names the Zoho app behind each pick
  • Your picks travel to the enquiry form

Around Bengaluru

Can your team see our factory and a live install site?

Yes, we always ask to. Our Bangalore consultants work from Vasanth Nagar, meet there by appointment, and visit the factory and one install site during scoping. Later reviews are mostly on video.

Factory belts

Hoskote, Nelamangala, Bommasandra, Peenya and Bidadi, where many modular and joinery units cut and pack. The Peenya industrial area page covers the estate in more depth.

Install neighbourhoods

New apartment towers along Sarjapur Road, Whitefield, Hebbal and Yelahanka keep crews busy. FSM territories are usually drawn around these clusters to cut travel between jobs.

Beyond the city

Craft units in Channapatna and Ramanagara, and furniture makers in Mysuru or Tumakuru, can work with the same Bangalore team, on video and on site when it helps.

From our clients

What do Indian businesses say about our Zoho projects?

Published feedback from clients in several sectors. None of these reviewers is a furniture maker, and the sofa and wardrobe orders above are sample jobs.

The team at Elite Tech Corporation is highly knowledgeable and extremely supportive. They took the time to understand each of our business use cases in detail and approached every requirement with a strong implementation mindset.
KVP EnterprisesFounder and CEO · manufacturing automation
What stood out most was their structured approach, clarity in communication, and commitment to aligning technology with practical, on-ground operations rather than offering generic solutions.
MegawinFounder and CEO · multiple Zoho applications
Your understanding of our requirements and customization of Zoho Books have positively impacted our operations. The successful implementation of APIs and workflows has streamlined processes.
F Care GroupFounder and CEO · Zoho Books, APIs, workflows

FAQ

What furniture owners ask before they commit

Bring your factory manager and install lead. We reply within 1 business hour.

Book my free Zoho fit assessment
Can Zoho run a modular furniture business in Bangalore?

Yes, with one custom piece. Zoho CRM takes orders from designers, builders and homeowners, Zoho Inventory holds boards, laminates and hardware, Zoho Books handles GST billing and milestones, and Zoho FSM schedules install crews. The cut list and multi-level BOM come from a Zoho Creator app we build for your sizing rules.

Does Zoho generate cut lists and optimise cutting patterns?

The Creator app we build generates the cut list and board count from the design's sizes. Optimising the cutting pattern on each sheet is the job of nesting or panel saw software; we pass the cut list to it and bring back the sheets used, where the software allows.

Can we reserve hardware for a project before packing?

Yes. The hardware kit from the BOM is reserved against the project in Zoho Inventory, so it cannot be used for another job, and shortages show up while there is still time to buy.

How are installation crews scheduled?

In Zoho FSM. Each install is a job with a time slot, crew, address, drawing and packing list. Crews use the FSM mobile app to see jobs, upload photos and take the customer's signature at handover.

Can we handle orders from interior designers with their own rates?

Yes. Each designer is an account in Zoho CRM with their projects and drawings, and Zoho Books holds designer-specific price lists. Referral or commission amounts can be tracked per project if you pay them.

How do builder orders for many flats work?

One master BOM is repeated across flats, deliveries are planned tower by tower, and Zoho Books raises milestone invoices with retention tracked until it is released. Snags are logged per flat as FSM follow-up jobs.

What about after-sales service and warranty calls?

Service calls become FSM jobs linked to the original project, so the technician knows which shutters, laminates and hardware went in. Out-of-warranty visits are billed from Zoho Books.

What will the licences cost?

At Zoho's India list prices, billed yearly and plus GST, for example Zoho Inventory Premium is ₹2,299 and Zoho Books Professional ₹1,499 per organisation a month, Zoho CRM Standard ₹800 per user a month, and Zoho FSM Standard ₹1,000 a month for up to 60 appointments. Our implementation is a fixed price in a signed scope.

We are a Channapatna toy unit, not a factory. Is this relevant?

Partly. You would not need the cut-list app or FSM. Zoho Inventory with variants by colour and size, online channel links and Zoho Books usually covers a craft unit selling to shops, online buyers and gifting firms.

Project-to-install review

Book your free Zoho fit assessment for a furniture unit

Send us one recent project, from the designer's drawing to the handover. We reply within 1 business hour. No obligation.

  • We map one project from order to installation with you
  • You see which steps run in standard Zoho and which need Creator
  • Meet at your factory, at Vasanth Nagar or on video

Tell us about your business

Three short steps. Fields marked * are required.

Your need
Your company
How we reach you

Privacy notice. We collect the details in this form (name, business email, phone, company, city and your requirement) only to reply to your enquiry and arrange the assessment. They are stored in Zoho CRM, the system we use to manage enquiries, and are never sold or used for advertising. The updates box is optional and you can withdraw it at any time. To see, correct or delete your details, or to withdraw consent, call +91 89259 24785 or message us on WhatsApp. Read our privacy policy.