Book a Meeting
Drawing DRG-63-36-400 Rev CCustomer spec on the CRM quote · Sample
Test 210 bar · held, no leakCreator test record · Sample
Honed tube to a pressure-tested cylinder

Hydraulics and pneumatics · Bengaluru and Karnataka

ERP for hydraulics and pneumatics manufacturers in Bangalore, built around the customer's drawing

Yes. Zoho can run a Bengaluru cylinder shop where almost every order starts as a drawing: the enquiry and spec-based quote in Zoho CRM, tubes, rods and seal kits in Zoho Inventory, a pressure test record per serial in a Zoho Creator app, GST invoices in Zoho Books and reseal jobs in Zoho Desk. Your honing, machining and test rigs stay; Zoho joins up the records between them.

  • Zoho Advanced Partner
  • 300+ projects for Indian firms
  • Kannada sessions for fitters and testers

We reply within 1 business hour · No obligation

300+
Zoho implementations so far
2021
First Zoho projects delivered
Kannada
Plus English, Tamil and Malayalam for training
ZohoAdvancedPartner

Also Zoho Creator Registered, Zoho Catalyst, AWS and Shopify Partner

Does it fit

Which hydraulics and pneumatics shops does Zoho suit?

Zoho suits shops of 15 to 250 people that build cylinders and small assemblies to order or from a catalogue, and need quoting, stock and test records to connect. Open the line that describes you.

BTD We build cylinders to the customer's drawing

Every order has its own bore, rod, stroke, mounting and seals, so the estimator is the bottleneck and revisions get mixed up. Start with CRM quotes driven by a Creator spec form, drawing revisions in WorkDrive, and a job record that carries the spec to the shop.

CAT We sell a catalogue range in volume

Standard tie-rod or welded cylinders, or ISO-profile pneumatic cylinders, sold through distributors and machine builders. Start with item groups for bore and stroke variants in Inventory, distributor price lists in Books and reorder levels for seal kits.

PPK We also build power packs and manifolds

Assemblies of reservoir, motor, valves and manifold block, each with bought-out parts from several suppliers. Start with composite items in Inventory, purchase orders by supplier and a test record per assembly.

SVC Repair and reseal is a big part of our work

Cylinders arrive from earthmovers, tippers and presses for new seals, rod rechroming or tube replacement. Start with a Desk ticket or Creator job card per cylinder, seal kit issues from Inventory and a retest record.

BIG We run several plants and need detailed scheduling

Zoho can still cover sales, stores, accounts and service, but finite scheduling across many honing and machining cells is not native. Plan for a planning tool alongside Zoho, or a larger custom Creator build that we would scope separately.

Story of one cylinder

How is a welded hydraulic cylinder built from a drawing, and what does Zoho track along the way?

Six stages turn a honed tube and a chrome rod into a tested, painted cylinder. Each picture grows into place as you reach it and the rail marks your stage. Under each stage you see the Zoho app that keeps its records, and where a custom Creator app does the job instead. The drawing numbers and pressures shown are Sample values.

  1. Honed tube and chrome rod
  2. End cap machining
  3. Welding
  4. Seal kit fitting
  5. Pressure test
  6. Paint and port caps

Stage 1 · Tube and rod

A honed tube and a chrome rod are cut to the stroke on the drawing

The order starts from the customer's drawing: bore, rod diameter, stroke, closed length, mountings and working pressure. Stores cut cold-drawn honed tube and induction-hardened chrome-plated rod from stock lengths, and the offcuts go back to stock as shorter pieces.

Zoho Inventory tracks tube and rod by size and length with heat numbers from the mill certificate. The spec card from the CRM quote travels with the job as a Creator record.

  • Zoho Inventory
  • Zoho CRM
  • Zoho Creator (custom)

Stage 2 · End caps

Glands, base caps and pistons are turned and threaded

Bar stock is turned on CNC lathes into the gland, piston and base end cap, with seal grooves and threads to the drawing. Many shops send part of this work to neighbouring machine shops in Peenya or Bommasandra on job-work challans.

Zoho Books issues the job-work challan and Inventory tracks what went out and came back. Operation-wise progress on your own lathes is a small Creator job card, because Zoho has no native shop-floor module.

  • Zoho Books
  • Zoho Inventory
  • Zoho Creator (custom)

Stage 3 · Welding

The base cap, ports and mountings are welded to the tube

The base end cap, the clevis or trunnion and the ports are welded on, usually by MIG, and the weld is checked before the tube is cleaned of spatter. A weld that leaks shows up only at pressure test, so knowing who welded which tube saves arguments later.

The Creator job card records the welder and the date against the cylinder's serial. Weld procedures and welder qualifications are your QA team's documents; Zoho can store them and their review dates in WorkDrive.

  • Zoho Creator (custom)
  • Zoho WorkDrive

Stage 4 · Seals

Rod seals, piston seals, wipers and guide rings go in

The fitter picks the seal kit for that bore and rod: rod seal, piston seal, wiper, O-rings, back-up rings and wear bands, in polyurethane, nitrile, FKM or PTFE depending on pressure and temperature. A wrong or missing seal is the most common reason a cylinder comes back.

Seal kits are kept in Zoho Inventory as composite items, so issuing one kit reduces every seal inside it. Low stock of a kit raises a reorder to your seal supplier before the fitter runs out.

  • Zoho Inventory
  • Zoho Books

Stage 5 · Pressure test

The cylinder is cycled and held at test pressure on the rig

On the test bench the cylinder is stroked fully, then held at the test pressure your QA plan sets above the working pressure, while the tester checks for leaks at the gland, welds and ports and for drift. Readings and the hold time are written down for every serial.

A Creator test record replaces the register: pressure, hold time, leaks seen, tester and result, linked to the job and later to the invoice. If a reading misses QA's limits, it flags; the decision stays with QA.

  • Zoho Creator (custom)
  • Zoho Analytics

Stage 6 · Finish

Painted, port-capped, tagged and sent with its papers

The cylinder is primed and painted in the customer's colour, ports are plugged with caps to keep dirt out, and a tag with the serial and spec goes on. OEM buyers often want the test record with the delivery.

Zoho Books raises the GST invoice, e-invoice and e-way bill; the test record PDF is attached; and the serial is now known to Zoho Desk for any later reseal or warranty claim.

  • Zoho Books
  • Zoho Desk
  • Zoho Inventory

Material board

Which materials does a cylinder shop need to trace, and what should Zoho record for each?

Tube, rod, bar and seals each carry different details that matter later. Tap a swatch to see what we would record in Zoho Inventory for it, and why it matters when a cylinder comes back.

ITEM · TUBE-HON-63x76 · Sample

Cold-drawn honed or skived tube

Track by
Bore, OD, length, heat no.
Unit
Metre, with cut pieces
Why
A scored bore found at reseal points back to the tube lot.

How quotes get made

Excel quote sheets, Zoho with a spec configurator, or a full CPQ tool: which suits a cylinder maker?

For most Karnataka shops, a Creator spec form feeding Zoho CRM quotes is the middle path: faster and more consistent than Excel, far lighter than a dedicated configure-price-quote system tied to CAD.

Three ways to quote custom cylinders
Point Excel quote sheetOne estimator's file Zoho CRM plus Creator spec formWhat we set upMost 15 to 250 staff shops Dedicated CPQ with CADLarge OEM suppliers
Who can quoteOnly the person who built the sheetAny trained estimatorSales engineers
Material ratesTyped in when someone remembersPulled from latest purchase ratesFrom the ERP
Drawing revisionsEmail attachmentsWorkDrive files on the CRM dealPLM vault
Spec carried to the shopRetyped on a job cardSame record becomes the jobAutomatic
Auto-generated 3D model or drawingNoNo; drawings stay in your CADOften
Setup effortNone, already thereModerate, named in a scopeLarge, and a separate licence

A general comparison of approaches, not of named products. Your design rules, such as rod buckling checks, stay with your engineers; the spec form can hold their limits as simple checks.

By product and buyer

What do cylinder makers in Karnataka build, and for whom?

Pick a buyer to bring the matching product lines to the front. Each card says what changes in the Zoho setup for that line.

WLD

Welded cylinders

Boom, arm, bucket and steering cylinders for loaders, backhoes and cranes, often to the OEM's drawing with tight delivery schedules.

Zoho: OEM schedules as sales orders, serial-wise test records, warranty per serial in Desk.

TRD

Tie-rod cylinders

Industrial cylinders for presses, machine tools and fixtures, easy to strip and reseal, built in standard bores with custom strokes.

Zoho: item groups by bore and mounting, stroke as a spec field on the quote.

TEL

Telescopic tipping cylinders

Multi-stage cylinders for tipper bodies and farm trailers, sold to body builders and trailer makers across Karnataka's district towns.

Zoho: stage-wise bill of parts as composite items, dealer and body-builder accounts in CRM.

AGR

Tractor and implement cylinders

Smaller cylinders for loaders, dozers and implements, with seasonal demand that peaks before sowing and harvest.

Zoho: Analytics on seasonal demand, reorder levels for seal kits ahead of the season.

LFT

Lift and dock cylinders

Cylinders for scissor lifts, dock levellers and stackers sold to material-handling equipment makers around Bengaluru's warehouse belts.

Zoho: repeat OEM part numbers, scheduled deliveries, service history for installed equipment.

PPK

Power packs and manifolds

Reservoir, motor, valves and machined manifold blocks assembled and tested as one unit for presses and special machines.

Zoho: composite items with bought-out parts, supplier POs and an assembly test record.

PNE

Pneumatic cylinders and valves

Profile and compact pneumatic cylinders, with valves and air preparation units, for automation and packaging lines in Bommasandra and Electronic City.

Zoho: distributor price lists, volume stock by bore and stroke, quick reorders.

SVC

Repair, reseal and rechrome

Cylinders from any buyer coming back for new seals, a new rod or a rechromed rod, often urgent because a machine is standing idle.

Zoho: Desk tickets with status updates, seal kits issued per job, retest record.

Free spec-to-quote builder

Can a buyer's cylinder spec turn into a quote request in one minute?

Try it. Pick a type, bore, rod, stroke, mounting and working pressure. You get a spec code and the theoretical push and pull force, and you can send the spec to us. In your own Zoho setup, the same form would create the CRM quote for your estimator.

FORCE = PRESSURE x AREA · THEORETICAL, BEFORE FRICTION AND SAFETY FACTORS · ESTIMATE ONLY

SPEC CODE

WLD-063/036-0400-CLV-160B-PU

PUSH49.9 kN
PULL33.6 kN
QTY20

Seal kit stock

How do you stop running out of the one seal a job needs?

Keep seal kits as composite items in Zoho Inventory with reorder levels, and issue kits rather than loose seals. When a kit is issued, every seal inside it is reduced, and the kit's reorder level warns purchase before the shelf is empty.

SEAL KIT STOCK · STORE 1 · Sample

SK-50/28-PU36 kits
SK-63/36-PU9 kits · reorder
SK-80/45-PU27 kits
SK-100/56-FKM6 kits
SK-125/70-PTFE2 kits · reorder

Reorder levels are set per kit from the last season's use. Purchase orders to your seal supplier go out from Zoho Books.

Repair and reseal service

What happens to a leaking cylinder from the day it arrives to the day it leaves?

A reseal job passes eight stations, and the owner of an idle machine wants to know which one it is at. Tap a station to see what Zoho records there.

Receive

A Desk ticket is opened with the customer, the machine it came from, a photo and the complaint: leaking gland, drifting under load, bent rod. A tag with the ticket number goes on the cylinder.

ZOHO DESK · TICKET · Sample

Licence cost

What will Zoho licences cost a hydraulics shop in Bengaluru?

The bill follows the number of people who sign in. A shop on Zoho Books Professional pays ₹1,499 per organisation per month billed yearly, plus GST, and the Creator apps for specs and test records are priced per user. Set your own plan and user count below.

  • 01Estimators and sales need CRM; fitters and testers may share a tablet login for the Creator app.
  • 02Custom apps (spec form, test record, job card) are named items in our fixed-price scope.
  • 03Moving years of old quotes costs more than moving open orders and the item list.

Connections

What can a cylinder shop's Zoho setup connect to?

Mostly what you already use for accounts, drawings and calls. Each line carries one label: native to Zoho, a Marketplace extension, or custom work we name before we start.

[NATIVE]E-invoice and e-way bill from Zoho Books

Generated when the dispatch invoice is saved.

[NATIVE]Zoho WorkDrive for drawings

Customer drawings and revisions filed on the CRM deal and job.

[NATIVE]Email and calendar

Gmail, Google Workspace or Microsoft 365 mail linked to enquiries.

[MARKETPLACE]Cloud telephony

Calls from buyers logged on the CRM record, for supported providers.

[CUSTOM]Tally during changeover

Ledger or invoice sync if accounts move in phases.

[CUSTOM]Test rig data

Pressure readings from a rig that logs to a file, attached per serial.

[CUSTOM]CAD bill of materials

A parts list exported from your CAD, imported into the job.

[CUSTOM]B2B lead portals

Enquiries from listing sites routed into CRM where the portal allows it.

Rig and CAD exports differ by make and version; we check yours before promising a link. See our Zoho integration services for how we build and support them.

Rollout plan

In what order does a cylinder shop move onto Zoho?

Quoting first, because that is where the shop's time goes. Then stock and seal kits, then test records and service. Dates come in the signed scope after we have seen the shop and priced one drawing together.

  1. 1Price one drawingWe sit with your estimator on a real enquiry to see every input and rule.
  2. 2Agree the scopeNative setup and the custom Creator pieces listed and priced separately.
  3. 3Quotes and accountsCRM, the spec form and Books with GST and job-work challans.
  4. 4Stock and kitsTube, rod, bar and seal kits in Inventory with reorder levels.
  5. 5Tests and resealsTest record per serial, then the Desk flow for repairs.
  6. 6Train and supportShort role-wise sessions, in Kannada on the floor if preferred, then ongoing help.

Across Karnataka

Where do hydraulics and pneumatics makers work in Karnataka, and how do we meet them?

Most shops sit in Bengaluru's industrial areas close to their machine-builder buyers, while construction and farm equipment demand pulls cylinders north and west. Our Bangalore office is at #39, 8th Main Road, Vasanth Nagar, by appointment; we visit shops where a floor walk helps and work on video otherwise.

BLR-W

Peenya, Jalahalli and Nelamangala

Cylinder shops, honing specialists and press builders side by side. More on ERP for Peenya industrial area.

BLR-S

Bommasandra and Jigani

Pneumatics and automation suppliers close to packaging and electronics lines. See ERP near Electronic City.

BLR-N

Doddaballapur and Hoskote

Larger sheds for material-handling and equipment makers on the city's northern and eastern edges.

NK

Hubballi-Dharwad and Belagavi

Construction equipment, tipper body builders and engineering units in north Karnataka.

SK

Mysuru and Tumakuru

Industrial areas within a day's reach of Bengaluru. Read Zoho for Mysuru or Zoho for Tumakuru.

Areas are named only to show where the trade is. We have offices in Bangalore, Coimbatore and Kochi only. Training in English, Tamil, Kannada and Malayalam.

Bangalore office Bangalore

#39, 8th Main Road, Vasanth Nagar,
Bangalore, Karnataka 560052
  • Call or WhatsApp +91 89259 24785
  • Meetings, workshops and training by appointment
  • Consultations and training in English, Tamil, Kannada and Malayalam
Loads Google Maps

Kochi branch Kochi

G16, 62/5011, Iyyattil Junction, Shenoys,
Kochi, Ernakulam, Kerala 682011
  • Call +91 89256 97717
  • Meetings, workshops and training by appointment
  • Consultations and training in English, Tamil, Kannada and Malayalam
Loads Google Maps

Coimbatore head office Head office

Kalpavriddhi building, Vilankurichi Road,
Indhuma Nagar, Coimbatore, Tamil Nadu
  • Call +91 89256 97727
  • Meetings, workshops and training by appointment
  • Consultations and training in English, Tamil, Kannada and Malayalam

From our clients

What have our clients said in their own words?

The reviews and logos below are the ones already on our website, unchanged.

The team at Elite Tech Corporation is highly knowledgeable and extremely supportive. They took the time to understand each of our business use cases in detail and approached every requirement with a strong implementation mindset.
KVP EnterprisesFounder and CEO · manufacturing automation
What stood out most was their structured approach, clarity in communication, and commitment to aligning technology with practical, on-ground operations rather than offering generic solutions.
MegawinFounder and CEO · multiple Zoho applications
Your understanding of our requirements and customization of Zoho Books have positively impacted our operations. The successful implementation of APIs and workflows has streamlined processes.
F Care GroupFounder and CEO · Zoho Books, APIs, workflows
TrukkingLulu HolidaysMegawinJADKingsSygaardJemkonBrealantRockolyLendonRohealthTengani

FAQ

Questions from cylinder makers

Send us a drawing and your current quote sheet; we will show how it would run in Zoho, or tell you if it would not.

Book my free Zoho fit assessment
Can Zoho work as an ERP for a hydraulic cylinder manufacturer in Bangalore?

Yes, for the business side and most records. Zoho CRM handles enquiries and quotes, Zoho Inventory holds tubes, rods, bar and seal kits, Zoho Books does GST billing and job-work challans, and Zoho Desk runs reseal jobs. The spec form, job card and pressure test record are custom Zoho Creator apps, named in the scope.

Can Zoho price a custom cylinder from the customer's drawing?

Not by reading the drawing. We build a Creator spec form where the estimator enters bore, rod, stroke, mounting, pressure and seals; it applies your pricing rules and current material rates and creates the Zoho CRM quote. The drawing itself stays in your CAD and is filed in WorkDrive.

How are seal kits handled in Zoho Inventory?

As composite items. Each kit lists its rod seal, piston seal, wiper, O-rings and guide rings, so issuing a kit reduces every part. Kits have their own reorder levels, and purchase orders to the seal supplier go from Zoho Books.

Does Zoho store a pressure test record for every cylinder?

There is no ready-made test module. We build a Creator test record per serial with the test pressure, hold time, leak checks, tester and result, against limits your QA team sets. It prints as a PDF for the buyer and links to the invoice and any later reseal job.

Can Zoho trace a failed cylinder back to the tube and rod lots?

Yes, if lots are recorded when material is issued. Tube and rod are kept with heat or lot numbers in Inventory, and the job record stores which lot went into which serial, so a reseal or warranty claim can be traced back.

Is Zoho suitable for pneumatic cylinder and valve makers too?

Yes. Pneumatic ranges usually move in volume, so item groups by bore and stroke, distributor price lists and reorder points matter more than per-serial records. The same CRM and Books setup handles distributors and machine builders.

Will Zoho schedule our honing and CNC machines?

No, not in depth. Zoho has no native machine scheduling or MES. A Creator job board can show which jobs are at which operation, which suits many shops. If you need finite scheduling across many cells, keep a planning tool alongside Zoho.

Can Zoho help with ISO or quality certification for our cylinders?

Zoho does not certify anything and neither do we. Your QA lead owns the quality system and the standards. Zoho can keep procedures, inspection records, calibration due dates and certificates organised and easy to produce for an audit.

Do you work with hydraulics makers outside Bengaluru?

Yes. Our Bangalore team works with companies across Karnataka over video calls and visits the shop when it helps. Meetings in the city happen at our Vasanth Nagar office by appointment.

What does a Zoho setup for a cylinder shop cost?

Zoho bills licences directly at Indian list prices, plus GST, which the calculator on this page shows. Our implementation is a fixed price in a signed scope agreed after the free fit assessment, with custom Creator apps listed as separate items.

Cylinder shop review

Book your free Zoho fit assessment for your cylinder shop

Tell us what you build, how quotes are priced from drawings and where test records sit today. We reply within 1 business hour. No obligation.

  • We price one real drawing with your estimator to see the steps
  • You see which records Zoho holds and which need a Creator app
  • Meet at your shop, at Vasanth Nagar or on video

Tell us about your business

Three short steps. Fields marked * are required.

Your need
Your company
How we reach you

Privacy notice. We collect the details in this form (name, business email, phone, company, city and your requirement) only to reply to your enquiry and arrange the assessment. They are stored in Zoho CRM, the system we use to manage enquiries, and are never sold or used for advertising. The updates box is optional and you can withdraw it at any time. To see, correct or delete your details, or to withdraw consent, call +91 89259 24785 or message us on WhatsApp. Read our privacy policy.