Book a Meeting

PCB fabrication and PCBA assembly · Bengaluru

ERP for PCB and PCBA manufacturing in Bangalore, from laminate panel to tested board

Yes, a Bangalore board shop can run its commercial and stores side on Zoho without touching the CAM station or the AOI machine. Quotes go out with the Gerber revision attached, laminates and plating chemistry are stocked by batch, a custom panel traveller records scrap at each stage, and GST invoices leave from the same records. We set this up for bare-board fabs, SMT assembly lines and units that do both.

  • Zoho Advanced Partner
  • Over 300 Zoho projects delivered since 2021
  • English, Tamil, Kannada and Malayalam training

We reply within 1 business hour · No obligation

Panel P-2611-07 · Rev CCreator traveller · Sample
First-pass AOI 96.4%Yield log · Sample
Laminate to tested assembly
300+
Zoho projects shipped
2021
Year we began Zoho work
4 languages
Kannada among them, for line staff
ZohoAdvancedPartner

Also Zoho Creator Registered, Zoho Catalyst, AWS and Shopify Partner

Your kind of board shop

Is Zoho a sensible ERP for a PCB or PCBA unit?

It fits units with roughly 10 to 300 people where the pain is quoting, material, travellers and billing, not machine control. Pick the description closest to your shop to see where we would begin and what we would leave alone.

A fab that sells bare boards

Your money is made or lost on panel utilisation and scrap between drilling and electrical test. Zoho begins with the quote: layer count, size, finish and quantity priced against a rate card, with the customer's Gerber zip stored on the deal. Laminate, copper foil, dry film and mask ink move through Zoho Inventory with batch numbers, and a Creator traveller follows each panel lot through the wet process.

  • Begin withRate-card quoting and laminate stock
  • Custom piecePanel traveller with scrap codes per stage
  • Leave aloneCAM, drill programs, flying probe software

How a board gets made

What happens to a panel between the laminate store and the test bench?

Six stages, each with its own scrap risk and its own record. Scroll and the board on the right gains each layer as you read; the chips under every stage name the Zoho app or the custom Creator piece that keeps the record. All job numbers are sample data.

  1. Laminate panel
  2. Drilling and plating
  3. Imaging and etching
  4. Solder mask and legend
  5. Paste, place, reflow
  6. AOI and test

Stage 1 · Laminate panel

Copper-clad sheets are cut and the traveller is born

Stores issue FR-4 sheets against the job, and the sheet batch number goes onto the panel lot so a delamination complaint months later can be traced to its supplier. This is the moment a Creator traveller record opens, carrying the job, the Gerber revision and the panel count.

  • Zoho Inventory
  • Zoho Creator (custom traveller)

Stage 2 · Drilling and plating

Holes are drilled, then copper grows inside them

Drill counts and broken-bit stops belong to the drill software. What Zoho keeps is the outcome: panels in, panels out, and any lot pulled for a plating thickness check. Copper anodes and plating salts are consumed from stock, so the purchase team sees the next order coming.

  • Zoho Creator (custom traveller)
  • Zoho Inventory

Stage 3 · Imaging and etching

The image goes down and the traces appear

Dry film is laminated, exposed and developed, and the etcher strips away everything that is not circuit. The revision on the traveller must match the film the operator picks up. A mismatch is the most expensive error in the shop, so the traveller refuses to move forward until the operator confirms the revision letter.

  • Zoho Creator (custom check)
  • Zoho WorkDrive

Stage 4 · Solder mask and legend

Green mask, white legend and a surface finish

Mask ink and legend ink have shelf lives, and ENIG or HASL chemistry is costly to waste. Zoho Inventory holds these consumables by batch with expiry dates, and the traveller logs mask defects separately from etch defects, so the weekly review blames the right process.

  • Zoho Inventory (batch and expiry)
  • Zoho Creator (custom traveller)

Stage 5 · Paste, place, reflow

Parts land on the board and the oven fixes them

The stencil prints paste, the placement machine fits parts from reels, and the oven reflows them. Zoho Inventory issues reels by lot and keeps the stencil linked to Rev C, while the line traveller records boards loaded and boards out of the oven, which is enough to spot a feeder problem without machine integration.

  • Zoho Inventory (reels by lot)
  • Zoho Creator (custom line log)

Stage 6 · AOI and test

Inspection, electrical test and the invoice

The AOI machine and the test jig decide pass or fail; Zoho is told the result. Passed boards go into finished stock with their lot, failures move to a rework location, and Zoho Books raises the GST invoice and e-way bill for what actually shipped.

  • Zoho Inventory
  • Zoho Books
  • Zoho Analytics

The job record

What should one PCB job record hold, and where does each field live?

Think of it as the title block on a fabrication drawing: a dozen fields that every department reads. Below is a Sample record laid out that way, with each numbered cell traced to the Zoho record that owns it.

Title 1Controller PCBA, CB-204
Drawing no. 2CB-204-FAB
Rev 2C
Layers 34
Base material 3FR-4, Tg 150
Thickness 31.6 mm
Finish 3ENIG
Array 43 x 4, V-score
Order qty 51,200 boards
Panels 4100 + 6 spare
Stencil 6ST-204-C
CAM release 7CAM engineer
Checked 7QA lead
Planned 7Planning desk
StatusSample
  1. Deal and customer part number. The Zoho CRM deal holds the buyer's own part name next to yours, which stops two names for one board.
  2. Drawing and revision. The Gerber zip and fab drawing sit in a WorkDrive folder linked from the deal; the revision letter is a locked field once CAM releases it.
  3. Build attributes. Layers, material, thickness and finish are item attributes in Zoho Inventory, and they drive the rate card on the next quote.
  4. Array and panel count. Boards per panel converts the order quantity into panels to launch, including the spares your yield history says you need.
  5. Order quantity. Taken from the Zoho Inventory sales order, confirmed from the accepted quote without retyping.
  6. Stencil. A tooling item tied to the board revision, so Rev D cannot run with a Rev C stencil.
  7. Sign-offs. Approval steps in the Creator traveller, by role rather than by name, with the time each was given.

Paper, Zoho or a big suite

Paper travellers, Zoho, or a heavy manufacturing suite: which suits a board shop?

Most Bangalore fabs and assembly shops we meet sit in the first column. Zoho with a custom traveller is the middle road; a full manufacturing suite with MES makes sense when machine data must flow live. Tapping a row pins it.

Ways to run a PCB or PCBA business compared
Point Paper travellers, Excel and TallyWhere most shops start Zoho with a Creator travellerCommercial, stores and yieldOur usual proposal Large ERP with MESMachine-connected plants
Gerber revision on the quoteIn an email threadAttached to the deal, locked after CAM releaseInside a PLM or document module
Panel travellerPaper card that goes missingTablet form per stage, custom builtMES terminal at each machine
Scrap and yield by stageTyped up at month end, if at allLogged per lot, charted weeklyCaptured live from equipment
Laminate, reels and chemistryStore registerBatch, lot and expiry in Zoho InventoryYes
AOI, SPI and test resultsStay on the machine PCSummary counts imported; raw data stays putOften integrated machine by machine
GST invoice and e-way billTyped into Tally after dispatchZoho Books from the shipped quantityYes
Multi-level MRP and finite schedulingNoNot native; composite items and reorder levelsUsually included
Who edits the setup next yearThe one person who understands the workbookYour admin, with us for bigger changesVendor or specialist consultants

Whether a large suite is worth it depends on line count and how much live machine data you truly use. If your answer is "a lot", we will tell you so during the fit assessment.

Bill of materials

How does a PCBA bill of materials sit inside Zoho Inventory?

As a composite item: the populated board is built from a bare board, reels, through-hole parts and process consumables. Open the branches of this Sample tree to see what each line is and how it is tracked.

Zoho Inventory handles one or two levels well. Deep multi-level MRP across hundreds of assemblies is not native; where you need it, we plan a Creator extension or keep your planning tool and sync the result.

CB-204 PCBA, Rev CFinished good · serial per board
CB-204 bare boardMade in-house · 1 per PCBA
  • FR-4 copper-clad sheet1 sheet per 12 boards · batch tracked
  • Dry film photoresistRoll, issued by metre
  • Solder mask ink, greenBatch with expiry date
  • Legend ink, whiteBatch with expiry date
  • ENIG chemistryBath top-ups logged as consumption
Surface-mount partsReels · lot tracked
  • Microcontroller, QFN1 per board · moisture-sensitive, floor life noted
  • 0402 capacitors38 per board · reel of 10,000
  • 0603 resistors24 per board · reel of 5,000
  • Board-to-wire connector2 per board · tray
Through-hole partsHand or wave soldered
  • Terminal block, 4-way1 per board
  • Electrolytic capacitor2 per board · approved alternate listed
Process consumables and toolingNot on the customer BOM
  • Solder paste, lead-freeJar with expiry · fridge location
  • Stencil ST-204-CTooling item locked to Rev C
  • Test fixture TF-204Tooling item, calibration due date

Sample BOM, simplified for reading

By board type

Does the setup change for flex, metal-core or automotive boards?

The apps stay the same; the fields, checks and sign-offs change with the board and the buyer. These are starting points for five board families made around Bangalore, refined after we look at your travellers.

Multilayer and HDI

Lamination cycles, buried vias and impedance coupons add stages and add places where a lot can fail. The traveller gains a press-cycle step and a coupon result field, and the quote rate card prices by layer count and via type.

  1. Inner layers
  2. Press
  3. Drill
  4. Plate
  5. Outer image
  6. Coupon test
  • Usually fitsZoho Inventory Premium, Books, Creator traveller
  • Key setupPress-cycle step, coupon pass field, rate card by stack-up
  • Watch forImpedance measurement stays in the test software; Zoho stores the pass record

For the commercial side of contract manufacturing, customer-supplied kits and EMS pricing, see our page for electronics and EMS companies in Bangalore.

Panel yield

Where do boards get scrapped, and how would you see it in Zoho?

Every stage loses a little, and the losses compound. Step through one Sample lot of 106 panels; each slide shows what typically goes wrong at that stage and how the traveller records it.

Drill

106 in, 105 out

A broken bit leaves one panel with an unfinished hole pattern. The operator picks scrap code D2 on the tablet, and the panel count drops before plating, not after.

Plating

105 in, 104 out

A thickness check fails on one panel. It is held, not scrapped, until the process engineer decides; a "hold" status is as useful as a scrap code.

Imaging and etch

104 in, 102 out

Two panels show open traces from a dust spot on the film. Etch defects are logged separately from mask defects so the clean-room fix gets credit.

Mask and legend

102 in, 101 out

Mask misregistration on one panel. The ink batch is already on the record, so if a pattern appears across lots you know which drum to question.

Reflow

1,212 boards in, 1,206 out

After depanelling the unit changes from panels to boards. Six boards tombstone in the oven and go to the rework bench, where a technician either saves them or scraps them.

AOI and test

1,206 in, 1,200 shipped

The order is met with six spares consumed. Zoho Analytics shows this lot against the last ten, and the planner adjusts the spare panels for the next launch.

Sample lot with made-up numbers. Your real scrap codes come from your process engineer, not from us.

Licence cost

What do the Zoho licences cost a PCB or PCBA unit?

A typical board shop needs Zoho Inventory and Books per organisation, Creator for the people who touch the traveller, and CRM for sales. At India list prices, Inventory Premium is ₹2,299 and Books Professional ₹1,499 per organisation a month, billed yearly, plus GST.

  • Zoho InventoryStandard ₹999, Premium ₹2,299, Plus ₹4,999 per organisation per month, billed yearly, plus GST
  • Zoho BooksStandard ₹749, Professional ₹1,499 per organisation per month, billed yearly, plus GST
  • Zoho CreatorStandard ₹480, Professional ₹1,200 per user per month, billed yearly, plus GST
  • Zoho CRMStandard ₹800, Professional ₹1,400 per user per month, billed yearly, plus GST

Zoho's India list prices as checked in November 2026; Zoho bills licences directly and can change them. Shop-floor users who only log the traveller may be cheaper on Creator than on a full suite. We price the implementation as one fixed figure inside a signed scope.

Two kinds of order

Can quick-turn prototypes and volume orders share one system?

Yes, as two lanes with different rules. A five-panel prototype and a 400-panel repeat order should not wait in the same queue or be priced by the same logic.

Quick-turn lane

  1. Web enquiry with GerbersLands in Zoho CRM tagged prototype
  2. Same-day proformaFixed set-up charge plus per-panel rate
  3. Paid before launchPayment link on the Zoho Books proforma
  4. Priority flag on the travellerShows red on the due-date board
  5. Courier and invoiceTracking number saved on the shipment

Volume lane

  1. Schedule from the buyerBlanket order split into call-offs
  2. Credit terms checkedOutstanding dues visible before release
  3. Material reservedLaminate and reels committed to the call-off
  4. Spares from yield historyPanel count adjusted by past scrap
  5. E-way bill and invoiceRaised in Zoho Books per dispatch

Connections

Which machines and tools does Zoho talk to in a board shop?

Fewer than people expect. Zoho exchanges records with your business tools; it does not drive CAM, drilling, placement or AOI equipment. Every connection below carries its label before we quote: Native to Zoho, Zoho Marketplace extension, or Custom work named in the scope.

Engineering data

  • Gerber and drill files stored per revision in Zoho WorkDrive Native
  • CAM and panelisation software stays as it is; the released revision is recorded Custom, if linked
  • AOI, SPI and flying-probe summaries imported as pass and fail counts per lot Custom

Buying and stores

  • Barcode labels for reels and laminate printed and scanned in Zoho Inventory Native
  • Distributor price files uploaded to refresh component costs Custom import
  • Import shipments of laminate and parts, with bill of entry details kept on the purchase Custom fields

Selling and billing

  • IRN e-invoices and e-way bills raised per dispatch in Zoho Books Native
  • WhatsApp Business for order status to buyers Native or Marketplace
  • Cloud telephony for supported providers, calls logged on the deal Marketplace
  • Tally during a parallel-run month Custom

Need a deeper look at material lists and alternates? Read how we handle BOM management in Zoho and batch traceability.

Rollout

How would we roll Zoho out in a working board shop?

Without stopping a line. Stores and billing move first because they touch every job; the traveller follows once the item master is clean. Dates go into your signed scope after the walkthrough, never before.

  1. 1Walk the floorWe follow one live job from laminate issue to dispatch and photograph the paperwork at every desk.
  2. 2Clean the item masterLaminates, reels, chemicals and tooling get one code each, with batch rules agreed with stores.
  3. 3Quote and orderRate card, Gerber folder and sales order flow set up in Zoho CRM and Inventory.
  4. 4Build the travellerCreator screens for each stage, tested on a shop-floor tablet with real operators.
  5. 5Run in parallelOne product family on Zoho and paper together, until the counts agree.
  6. 6Hand overAdmin trained, yield dashboard live, support agreed for the changes that always come.

Free requirements list

Which of these does your board shop need first?

Tick the problems you want solved. The list fills our contact form so the first call starts with your priorities, and it is useful to hand any vendor too.

0 / 12 board-shop needs ticked

Quoting
Material
Shop floor
Money

In and around Bengaluru

Can someone from your Bangalore team walk our shop floor?

Yes. Our Bangalore office is on 8th Main Road in Vasanth Nagar, and meetings there are by appointment. For a board shop the useful meeting is on your floor, so consultants visit the unit for the walkthrough and most later work runs on video calls.

Electronic City phases

Phase 1 and Phase 2 have the densest mix of electronics units in the city, and many assembly lines there buy bare boards in. See our Electronic City page.

Bommasandra and Jigani

KIADB plots along the Anekal side hold fabs and wet-process units where effluent handling, and the KSPCB consent that governs it, shape the floor plan.

Peenya and Whitefield

Older Peenya units often do mixed electronics and sheet-metal work, while Whitefield's EPIP zone leans to export-facing assembly. Read about Zoho for Peenya units.

Mysuru, Hubballi-Dharwad and beyond

Board shops outside the city work with us the same way: a site visit for the walkthrough, then video calls. Mysuru teams can start from our Mysuru page.

Operators and store staff are trained by role in English, Tamil, Kannada and Malayalam, and the custom traveller screens can carry Kannada labels for line staff who prefer them.

Client words

What do businesses say after a Zoho project with us?

Published reviews from our clients across industries, shown as they appear on our website.

The team at Elite Tech Corporation is highly knowledgeable and extremely supportive. They took the time to understand each of our business use cases in detail and approached every requirement with a strong implementation mindset.
KVP EnterprisesFounder and CEO · manufacturing automation
What stood out most was their structured approach, clarity in communication, and commitment to aligning technology with practical, on-ground operations rather than offering generic solutions.
MegawinFounder and CEO · multiple Zoho applications
Your understanding of our requirements and customization of Zoho Books have positively impacted our operations. The successful implementation of APIs and workflows has streamlined processes.
F Care GroupFounder and CEO · Zoho Books, APIs, workflows
TrukkingLulu HolidaysMegawinJADKingsSygaardJemkonBrealantRockolyLendonRohealthTengani

FAQ

PCB and PCBA ERP questions

Not sure Zoho is enough for your board shop? Ask us; we will say plainly if it is not.

Book my free Zoho fit assessment
Can Zoho work as an ERP for a PCB fabrication unit in Bangalore?

Yes, for the business side of the unit. Zoho CRM handles quotes with the Gerber revision attached, Zoho Inventory stocks laminate, inks and chemistry by batch, Zoho Books raises GST invoices and e-way bills, and a custom Zoho Creator traveller records each panel lot through the stages. Machine control, CAM and test equipment stay in their own software.

Does Zoho have a built-in panel traveller or MES?

No. Zoho has no native shop-floor execution module. We build the panel traveller as a custom Zoho Creator app with stage screens, scrap codes and sign-offs, and we name it as custom work in your scope so there is no surprise later.

Can Zoho read results from our AOI, SPI or flying-probe machines?

Not directly. The machines keep their own detailed data. What we usually set up is an import of summary counts per lot, such as boards inspected, passed and sent to rework, either by a file upload or a small custom integration, depending on what each machine can export.

How do we stop a job running with the wrong Gerber revision or stencil?

The revision letter becomes a locked field once CAM releases it, the Gerber files sit in a WorkDrive folder for that revision, and the stencil is a tooling item tied to the same revision. The Creator traveller asks the operator to confirm the revision at imaging and at paste print before the lot can move on.

Can Zoho Inventory track reels and moisture-sensitive parts?

Zoho Inventory tracks reels by lot or batch and can hold a note on moisture sensitivity and floor life. Counting the exposed hours of an opened reel automatically is not native; if you need that, it becomes part of the custom Creator work or stays in your line software.

What will the Zoho licences cost for a 40-person PCBA unit?

The bill follows the people who log in. A common mix is Zoho Inventory Premium at ₹2,299 and Zoho Books Professional at ₹1,499 per organisation a month, Creator Standard at ₹480 per traveller user and Zoho CRM Standard at ₹800 per sales user, all billed yearly plus GST, at Zoho's India list prices checked in November 2026. The setup work is priced separately, as a fixed amount written into a signed scope.

Is Zoho a good fit if we need full MRP and finite capacity scheduling?

Not on its own. Zoho Inventory handles composite items and light planning, but deep multi-level MRP and finite scheduling are not native. Some units add a custom planning layer in Creator; plants that depend on live machine scheduling are usually better served by a dedicated manufacturing suite, and we will tell you if that is your case.

Can you meet us at our unit in Bommasandra or Electronic City?

Yes. The first walkthrough is best done on your shop floor, and we arrange the visit by appointment. Our Bangalore office is in Vasanth Nagar, and after the walkthrough most project work runs on video calls.

Can our line operators be trained in Kannada?

Yes. We train operators, store staff and admins by role in English, Tamil, Kannada and Malayalam, and the custom traveller screens can show Kannada labels where your line staff prefer them.

Board shop workflow review

Bring one panel traveller to your free Zoho fit assessment

Show us how a job moves from Gerber to AOI today. A consultant replies within 1 business hour. No obligation.

  • We follow one panel from laminate cut to final test with you
  • You see which steps Zoho holds and which stay in CAM, AOI and test software
  • Meet at your unit, at Vasanth Nagar or on a video call

Tell us about your business

Three short steps. Fields marked * are required.

Your need
Your company
How we reach you

Privacy notice. We collect the details in this form (name, business email, phone, company, city and your requirement) only to reply to your enquiry and arrange the assessment. They are stored in Zoho CRM, the system we use to manage enquiries, and are never sold or used for advertising. The updates box is optional and you can withdraw it at any time. To see, correct or delete your details, or to withdraw consent, call +91 89259 24785 or message us on WhatsApp. Read our privacy policy.