Book a Meeting

Die casting · foundries · Bengaluru and Karnataka

Die casting and foundry ERP in Bangalore, from ingot to impregnated housing

Can Zoho run a die casting shop or foundry in Bangalore? Yes, as the business system wrapped around your furnace and machines. Zoho CRM holds every RFQ and drawing, Zoho Inventory counts ingots, returns and finished castings, Zoho Books raises the GST invoice and e-way bill, and a custom Zoho Creator app we build keeps the melt log, die shot counts and rejection codes. Furnace controls and machine data stay where they are.

  • Zoho Advanced Partner
  • 300+ Zoho projects
  • Supervisor training in Kannada

We reply within 1 business hour · No obligation

Heat H-0412 · melt loss 3.8%Creator melt log · Sample
Die D-07 · 61,200 of 80,000 shotsDie register · Sample
Ingot to impregnated housing
300+
Zoho projects completed for Indian firms
2021
Building on Zoho since then
4 languages
English, Tamil, Kannada and Malayalam training
ZohoAdvancedPartner

Also Zoho Creator Registered, Zoho Catalyst, AWS and Shopify Partner

Your kind of casting unit

Which casting shops in Karnataka is this set up for?

It fits units that sell castings against drawings and schedules: aluminium pressure die casters, gravity and low-pressure shops, and sand foundries pouring grey or SG iron. Pick the description closest to yours to see the symptoms we usually hear and where the Zoho work would begin.

Aluminium pressure die casting, sold to order

Typical of the sheds in Bommasandra, Jigani and the Peenya phases: six to fifteen cold-chamber machines, a central melting furnace, trimming presses and a machining section that may sit next door or at a job worker. Buyers send monthly schedules with frequent revisions.

  • Melt loss is guessed at month end from purchase and sales weights
  • Nobody can say how many shots a die has left before its next polish
  • Customer rejections arrive as a debit note weeks after dispatch
Start with
Zoho Inventory for ingots and returns, plus a Creator melt and die app
Then add
Zoho CRM for schedules and RFQs, Zoho Books for e-invoices
Watch for
Shot counters typed in by hand drift; plan a daily close per machine

How a casting is made

What happens between an ingot and a packed housing?

Six stages, each with a record that usually lives on paper. Scroll through them: the rail follows you, the layers drift at their own depth, and every stage names the Zoho app or the custom Creator screen that would hold its data. Every figure is Sample.

  1. Ingot melting
  2. Die preparation
  3. High-pressure casting
  4. Trimming
  5. Fettling and machining
  6. Impregnation and dispatch
Charge 1,200 kgLoss 46 kg · Sample

Stage 1 · Ingot melting

Ingots and returns go into the furnace, and a weight comes out

The melter charges fresh ingot with runners and biscuits from yesterday, skims dross, degasses and checks temperature. Today that is a line in a register. In the Creator melt log it becomes a heat number with charge weights by alloy, dross removed and liquid metal tapped, so melt loss is a figure per heat instead of a month-end argument.

  • Zoho Inventory
  • Zoho Creator (custom)
Die D-07 · preheat doneNext polish at 65,000 · Sample

Stage 2 · Die preparation

The die is set, preheated and sprayed

Before the first shot the setter mounts the die, checks cooling lines and sprays release agent. The die register in Creator shows which die went on which machine, its shot count so far and when it is due for polishing or a crack check, so setting is planned rather than discovered.

  • Zoho Creator (custom)
M-04 · 612 shots todaySample shift close

Stage 3 · High-pressure casting

Metal is shot into the die and the halves part

Each shot fills the cavity in a fraction of a second and the machine ejects a casting with its biscuit, runners and overflows still attached. At shift close the operator enters good shots and warm-up shots per die on a tablet, in Kannada if that suits the crew. Machine settings stay on the machine controller; Zoho is not a process monitoring system.

  • Zoho Creator (custom)
  • Zoho Inventory
Returns bin +41 kgBack to furnace · Sample

Stage 4 · Trimming

Runners, overflows and flash drop away

The trim press clips the casting free. What falls off is not waste: it is aluminium that goes back into the furnace. Weighing the returns bin and posting it as an internal receipt in Zoho Inventory is the single step that makes melt loss and yield honest.

  • Zoho Inventory
Reject: porosity at bossCode P2 · Sample

Stage 5 · Fettling and machining

Grinding, shot blasting and the first machining pass

Fettlers grind off what the press missed, and machining opens up the porosity that was hidden under the skin. Every reject gets a reason code on the Creator screen, so a month later you can tell whether the problem is the die, the metal or the machining. Machining done by a job worker leaves on a delivery challan from Zoho Books and comes back against it.

  • Zoho Creator (custom)
  • Zoho Books
Bin 3 of 8 · 240 pcsE-way bill ready · Sample

Stage 6 · Impregnation and dispatch

Sealed against leaks, packed into bins, invoiced

Housings that must hold oil or air go for vacuum impregnation, often at an outside vendor, then a leak test. Packed bins are picked against the customer's schedule in Zoho Inventory, and Zoho Books raises the e-invoice and e-way bill from the same packing list.

  • Zoho Inventory
  • Zoho Books
  • Zoho CRM

Melt loss and yield

How do you measure melt loss per heat instead of per month?

Weigh three things every heat: what goes into the furnace, what comes out as liquid metal, and what comes back from trimming. With those three numbers in the Creator melt log, melt loss and casting yield calculate themselves, and the costing in Zoho Books stops relying on a standard percentage someone set years ago.

Heat H-0412 · Sample shift

Sample heat record
Fresh ingot charged820 kg
Returns charged (runners, biscuits)380 kg
Total charge1,200 kg
Dross and burning loss46 kg
Liquid metal poured1,154 kg
Good castings after trimming612 kg
Returns from the trim press470 kg
Rejected castings sent back to melt72 kg

Melt loss

3.8%46 kg lost out of 1,200 kg charged

Casting yield

53%612 kg good out of 1,154 kg poured

Rejects back to melt

6.2%72 kg of 1,154 kg poured; each kilo is melted and paid for twice

Sample numbers for one shift, chosen to make the arithmetic easy to follow. Your own percentages depend on alloy, part design, furnace and practice; we build the formulas, we do not promise the result.

One week, two ways

What changes when the melt and die records leave the register?

The work on the floor stays the same. What changes is how fast a number reaches the person who needs it. Drag the handle to compare a sample week in a Peenya die casting shop, first on registers and WhatsApp photos, then with Zoho and a Creator app.

Registers and photos

  • MondayMelt register photographed and posted in a group; half the weights are unreadable
  • TuesdayDie D-07 cracks mid-shift; its last polish date is in a supervisor's diary
  • ThursdayCustomer calls about leakers; nobody can link them to a heat or a die
  • SaturdayAccounts books scrap sales without knowing how much metal was lost

Zoho with a Creator app

  • MondayEach heat logged on the tablet by the furnace with weights and temperature
  • TuesdayD-07 flagged two days early because its shot count crossed the polish limit
  • ThursdayThe leak complaint opens the dispatch, the heat and the die in three taps
  • SaturdayMelt loss for the week sits on one dashboard beside scrap sales

A made-up week for illustration only; no client records are shown.

Three routes

Tally and Excel, Zoho with a Creator app, or a foundry-specific ERP?

Most Karnataka casting units today run Tally with Excel sheets. Zoho with a custom Creator app sits between that and a dedicated foundry ERP: it covers sales, stock, accounts and the casting logs, and leaves furnace and machine control to the equipment. Click any row to pin it.

Three ways to run a die casting or foundry business compared
Point Tally plus ExcelCommon starting point Zoho plus CreatorApps plus a casting appOur usual recommendation Foundry-specific ERPPackaged for casting
Melt loss per heatManual sheetCreator melt logUsually built in
Die shot count and lifeDiaryCreator die registerVaries by vendor
Rejection reason codesRarely recordedYour own code listFixed or configurable list
RFQs, schedules and follow-upsEmail and callsZoho CRMOften a separate CRM
E-invoice plus e-way bill under GSTYesZoho BooksUsually
Job work challans for outside machiningPossible, by handDelivery challans in Zoho BooksUsually
Deep MRP and capacity schedulingNoNot native; light planning onlyOften included
Changing a screen next monthEdit the sheetChange the Creator form, same weekVendor change request

The right-hand column describes the category, not a named product. Plants needing full MRP and finite scheduling should keep such a system, with Zoho around it.

Die life tracker

How many shots does each die have left before it needs attention?

A die is the most expensive tool in the shop and it wears quietly. The Creator die register adds up shots from every shift close, compares them with the life and polish interval you set per die, and warns the tool room before a crack shows up on the casting.

D-03 Gearbox cover, 2-cavity

27,400 of 80,000 shots · polish at 30,000 · Sample

D-07 Motor end shield

61,200 of 80,000 shots · polish due now · Sample

D-11 LED street-light housing

41,800 of 80,000 shots · next crack check at 45,000 · Sample

D-14 Compressor bracket

74,500 of 80,000 shots · plan a replacement die · Sample

D-18 Pump volute, gravity die

3,800 of 20,000 pours · coating log up to date · Sample

Shot counts come from the operator's shift close. Reading counters straight from the machine controller is possible on some machines through a gateway and Zoho Catalyst; that is custom work we scope only after seeing your machines.

Job board

Where is every customer order on the shop floor right now?

The planner and the sales team look at the same board. Each card is a customer order line moving through the shop; the stage changes when the floor posts a shift close, a challan or a QC decision, not when someone remembers to update a sheet.

Melt queue 2

Gearbox cover2,400 pcs · ADC12Tier-2 auto buyer · Sample
Fan motor end shield5,000 pcs · LM6Appliance maker · Sample

On machine 2

LED housingM-04 · 1,180 of 3,000Lighting OEM · Sample
Compressor bracketM-09 · 640 of 1,500HVAC buyer · Sample

Trim and fettle 1

Throttle body900 pcs waitingTwo-wheeler supplier · Sample

Out for job work 2

Pump voluteChallan DC-118 · machiningPump maker · Sample
Oil pump coverChallan DC-121 · impregnationEngine parts buyer · Sample

QC hold 1

Gear housing86 pcs · porosity reviewTractor parts buyer · Sample

Ready to ship 1

Motor end shield8 bins · invoice draftedMotor maker · Sample

The board is a Creator view over Zoho Inventory and Books records. Zoho does not schedule machines for you; the planner still decides the sequence, and the board shows the result.

Rejection reasons

Why are castings rejected, and is it the die, the metal or the machining?

You can only fix what you can name. We set up a short code list with your quality engineer, one code per defect family, and the floor taps a code for each reject. A sample tally for one week looks like this.

P1 · Gas porosity22Usually metal: degassing, moisture, return ratio
P2 · Shrinkage at bosses13Usually die: cooling and overflow design
C1 · Cold shut and misrun9Metal temperature, die temperature, shot speed
D1 · Soldering and die marks6Spray, die coating and polish interval
M1 · Machining scrap4Fixture or tool; not the casting's fault
L1 · Leak test failure3Porosity that impregnation did not seal

Sample week of 57 rejects across one shop. Root-cause methods, PPAP files and any IATF 16949 quality system stay with your quality team; Zoho holds the counts and links each reject to its heat, die and dispatch.

Who you cast for

How does the setup change with the buyer you supply?

The casting process is similar whoever buys the part. The paperwork, schedules and proof each buyer asks for are not. These are the buyer groups we plan for with Bengaluru and Karnataka casting units.

Automotive castings, and forgings beside them

Suppliers around Bidadi, Narasapura and Hoskote ship housings and brackets against rolling schedules with weekly call-offs. Many also buy or sell forgings, so the same Zoho setup tracks forged blanks from vendors next to their own castings.

  1. Schedule
  2. Heat
  3. Cast and trim
  4. Machine
  5. Bin dispatch

Zoho for automotive suppliers in Bangalore

  • Usually fitsZoho CRM, Inventory, Books and a Creator casting app
  • Key setupSchedule lines per part, bin labels, heat on every dispatch
  • Watch forEDI with large OEMs is custom work, scoped separately

Licence cost

What does Zoho cost for a die casting unit?

At Zoho's India list prices, a small shop on Zoho Inventory Standard and Zoho Books Standard pays ₹999 plus ₹749 a month per organisation, billed yearly, plus GST. The Creator casting app adds a per-user charge for the people who use it. Choose a plan and a user count to see your own figure.

  • Who logs inMelters and fettlers rarely need their own login; a shared shift tablet often works
  • Creator editionStandard covers simple logs; Professional adds more integration headroom
  • Our workA fixed price agreed in a signed scope, quoted after the fit assessment

Prices are Zoho's published India rates as read in November 2026. Zoho bills licences directly and can change them; we recheck before you buy.

Connections

What does the casting shop's Zoho setup connect to?

Three groups of connections matter in a foundry: getting orders in, getting floor data in, and getting money out. Each one is labelled before we start as Native to Zoho, a Zoho Marketplace extension, or Custom work written into your scope.

Orders in

RFQs and schedules without retyping

  • Website enquiry form into Zoho CRM with the drawing attached Native
  • Buyer schedules uploaded from Excel into sales orders Native
  • OEM EDI or supplier portals Custom
  • Cloud telephony call logs on the buyer record, for supported providers Marketplace

Floor data in

Weights, counts and test results

  • Shift close on a tablet through the Creator app Custom
  • Spectrometer report PDFs attached to the heat record Custom
  • Machine shot counters through a gateway and Zoho Catalyst, where the controller allows it Custom
  • Platform scale or weighbridge readings Custom

Money out

Invoices, challans and payroll

  • E-invoices and e-way bills raised in Zoho Books Native
  • Job work delivery challans for machining and impregnation vendors Native
  • Zoho Payroll with PF, ESI and Karnataka professional tax Native
  • Tally kept alongside for a parallel month Custom

Which controller or scale can be read depends on make and model; we check yours before naming it in the scope.

Rollout order

How does a casting unit move onto Zoho without stopping the furnace?

Pouring never stops for a software project, so we start with the commercial side and add floor records one area at a time. The dated plan goes into your signed scope; the order below is how we usually sequence it.

  1. 1Walk one heatWith your melter and supervisor, from ingot receipt to the invoice, noting every register and photo along the way.
  2. 2Items and alloysIngot grades, returns, cores, castings and machined parts set up in Zoho Inventory with clear units.
  3. 3Sales and accountsZoho CRM for RFQs and schedules, Zoho Books for invoices, challans and e-way bills, opening balances from Tally.
  4. 4The casting appMelt log, die register and reject codes built in Creator, tried on one machine before the rest.
  5. 5Train the floorShort sessions at the plant for melters, setters and QC in Kannada or English; office staff in any of our four languages.
  6. 6Read the numbersAfter a full month we review melt loss, die alerts and reject codes with you and adjust the forms.

Requirements checklist

Which records does your casting shop want out of registers first?

Tick what matters. The ring fills as you go, and the finished list drops straight into the enquiry form so our first call starts from your priorities, not a demo script.

Ticked so far: 0 / 14

Furnace and metal
Dies and machines
Quality
Orders and money

Near your plant

Can someone from your team visit our casting shop?

Yes, by appointment. Our Bangalore office is at #39, 8th Main Road, Vasanth Nagar, and the discovery walk-through is best done at your plant, standing next to the furnace. Design reviews and most of the build run on video calls; floor training happens on site in Kannada or English.

  1. Peenya and Nelamangala roadOlder die casting and machining sheds, many on job work for larger buyers. Read how Zoho fits Peenya units.
  2. Bommasandra, Jigani and Attibele sideNewer HPDC cells serving auto and electrical buyers to the south; Electronic City is close by.
  3. Dobbaspet, Doddaballapur and HarohalliKIADB plots where larger casting and machining units have moved for space and power.
  4. Belagavi, Hubballi-Dharwad and ShivamoggaIron foundry belts we support on video, with planned site visits for training.
  5. Mysuru and TumakuruEngineering units near the city industrial areas; see our pages for Mysuru and Tumakuru.

These are areas we travel to and work with remotely; our only Karnataka office is in Vasanth Nagar. KSPCB consents, KIADB plot rules and power tariffs are your plant team's matters; we only record the dates and documents you ask us to.

Client feedback

What have Indian clients said about working with us?

Reviews published on our website by clients across industries. Casting projects are confidential, so no foundry is named here.

The team at Elite Tech Corporation is highly knowledgeable and extremely supportive. They took the time to understand each of our business use cases in detail and approached every requirement with a strong implementation mindset.
KVP EnterprisesFounder and CEO · manufacturing automation
What stood out most was their structured approach, clarity in communication, and commitment to aligning technology with practical, on-ground operations rather than offering generic solutions.
MegawinFounder and CEO · multiple Zoho applications
Your understanding of our requirements and customization of Zoho Books have positively impacted our operations. The successful implementation of APIs and workflows has streamlined processes.
F Care GroupFounder and CEO · Zoho Books, APIs, workflows
TrukkingLulu HolidaysMegawinJADKingsSygaardJemkonBrealantRockolyLendonRohealthTengani

FAQ

Die casting and foundry ERP questions

Ask us anything about melt records, dies or job work. If Zoho is the wrong fit for your plant, we will say so.

Book my free Zoho fit assessment
Is Zoho a real ERP for a die casting unit?

Zoho covers the business side of a casting unit well: RFQs and schedules in Zoho CRM, ingots, returns and castings in Zoho Inventory, invoices, challans and e-way bills in Zoho Books. The casting-specific records, such as the melt log, die register and reject codes, are a custom Zoho Creator app we build for you. It is not a furnace control, MES or deep MRP system, and we say that plainly in the scope.

How do you calculate melt loss in Zoho?

The Creator melt log records, for each heat, the fresh ingot and returns charged, the dross removed and the liquid metal tapped. Melt loss is the charge minus the metal tapped, divided by the charge. Because trimming returns are weighed back into Zoho Inventory, the return ratio and casting yield come from the same records.

Can Zoho track how many shots each die has done?

Yes, through the die register in the Creator app. Operators enter good and warm-up shots per die at each shift close, the app adds them up, and it alerts the tool room when a die reaches the polish, crack check or life limit you set. Reading counters directly from a machine controller is custom work we only scope after checking your machines.

We send castings out for machining and impregnation. How is job work handled?

Castings leave on a job work delivery challan from Zoho Books and come back against it, so stock at each vendor stays visible. Rejections reported by the vendor are entered against the same challan in the Creator app with a reason code.

Can Zoho handle both aluminium die casting and iron foundry work?

Yes. The difference is in the items and the logs: alloy ingots and returns for aluminium, pig iron, steel scrap and foundry returns for iron, plus pattern records for sand foundries. We set up the charge items and log fields for what you actually pour.

Does this make our plant IATF 16949 or AS9100 ready?

No ERP, Zoho included, can do that by itself, and we do not promise it. Zoho can hold heat numbers, certificates, reject records and dispatch history that your quality team uses. The quality system, audits and approvals stay with your quality and compliance lead.

How much do the Zoho licences come to for a casting shop?

At Zoho's India list prices, Zoho Inventory Standard is ₹999 and Zoho Books Standard is ₹749 per organisation per month, billed yearly, plus GST, and Zoho Creator Standard is ₹480 per user per month billed yearly, plus GST. Our own work is priced separately, as a fixed amount written into a signed scope.

Our melters and fettlers do not use computers. Will this work?

Usually a shared tablet at the furnace and one at the fettling bay is enough, with large buttons and few fields. We train supervisors and operators at the plant in Kannada or English, and office staff in English, Tamil, Kannada or Malayalam.

Our foundry is in Belagavi, not Bangalore. Is that too far for you?

Yes. The build and most reviews run on video calls, and we plan site visits for the floor walk-through and training. Meetings in Bangalore are by appointment at our Vasanth Nagar office.

Can we keep Tally for a while?

Yes. Many units run Tally and Zoho Books in parallel for a month or a quarter while opening balances and ledgers are checked. A two-way sync with Tally is custom work, so most clients prefer a clean cut-over date instead.

Foundry workflow review

Book your free Zoho fit assessment for the casting shop

Tell us what you pour, how many machines or moulding lines run and where the melt records live today. We reply within 1 business hour. No obligation.

  • We walk one heat from ingot to invoice with your supervisor
  • You see which steps are Zoho apps and which are a Creator build
  • Meet at your plant, at Vasanth Nagar or on a video call

Tell us about your business

Three short steps. Fields marked * are required.

Your need
Your company
How we reach you

Privacy notice. We collect the details in this form (name, business email, phone, company, city and your requirement) only to reply to your enquiry and arrange the assessment. They are stored in Zoho CRM, the system we use to manage enquiries, and are never sold or used for advertising. The updates box is optional and you can withdraw it at any time. To see, correct or delete your details, or to withdraw consent, call +91 89259 24785 or message us on WhatsApp. Read our privacy policy.