Book a Meeting
Shot 48.2 g · 4 cavitiesPart spec · Sample
Regrind cap 15% · PP naturalMaterial rule · Sample
Granule to packed part

Plastic injection moulding · Bengaluru and Karnataka

Plastic injection moulding ERP in Bangalore, counted in grams, shots and mould changes

Can Zoho run an injection moulding unit? Yes, for everything around the press. Zoho CRM keeps buyer schedules and quotes, Zoho Inventory counts resin, masterbatch, regrind and finished parts, Zoho Books invoices with e-way bills, and a custom Zoho Creator app we build holds the shift log, mould changes and the register of customer-owned moulds. Machine process settings stay on the machine.

  • Zoho Advanced Partner
  • 300+ projects completed
  • Shift-lead training in Kannada

We reply within 1 business hour · No obligation

300+
Zoho projects for Indian businesses
2021
When we began our Zoho work
3 offices
Vasanth Nagar in Bangalore, plus Coimbatore and Kochi
ZohoAdvancedPartner

Also Zoho Creator Registered, Zoho Catalyst, AWS and Shopify Partner

Is it for you

Which moulding shops get the most from Zoho?

Custom moulders with eight to sixty machines who sell parts to other manufacturers gain the most, because their margin hides in resin, regrind and changeovers. Open the panel that sounds like your plant.

The owner quotes, the supervisor plans, accounts runs Tally. Resin is bought in bags when stock looks low, and nobody knows the true regrind ratio on a part.

  • First winResin, masterbatch and regrind as separate stock items in Zoho Inventory
  • NextA shift log on a tablet per press

From granule to box

What happens to a bag of granules on its way to a packed part?

Six steps, and at each one material either becomes a good part, becomes regrind or is lost. Scroll on: each picture is uncovered as it arrives, its layers move at their own depth, and the chips show where the record lives in Zoho. Figures are Sample.

  1. Polymer granules dried
  2. Mould loaded
  3. Injection and cooling
  4. Ejection and degating
  5. Inspection
  6. Packed to customer
PC grade · lot 2611Dried 4 h at 120 °C · Sample

Step 1 · Polymer granules dried

Bags are opened, granules dried, a lot number carried forward

Hygroscopic grades such as PC, PA and ABS go through a dryer before moulding; polypropylene often does not. The material issue in Zoho Inventory records which supplier lot went into which press, so a buyer's complaint about splay marks can be traced back to a bag.

  • Zoho Inventory
  • Zoho Creator (custom)
Mould M-118 on press 7Change took 74 min · Sample

Step 2 · Mould loaded

The mould swings off the trolley and into the press

Mould changes are where capacity quietly disappears. The setter logs start and end of each change, the mould's shot counter and anything noticed on the parting line. Over a quarter that log shows which moulds take longest to set and which are due for preventive maintenance.

  • Zoho Creator (custom)
Cycle 28 s · 4 cavitiesPlanned rate · Sample

Step 3 · Injection and cooling

Melt fills the cavity and cools into shape

Most of a cycle is cooling time. Zoho does not watch the cycle; the Creator shift log records shots made, cavities running and minutes lost, from which output and efficiency per press follow. Reading shot counts straight from presses is possible on some controllers, as custom work through Zoho Catalyst.

  • Zoho Creator (custom)
  • Zoho Catalyst (custom)
Runner 6.4 g per shotTo grinder · Sample

Step 4 · Ejection and degating

Parts drop, runners go to the grinder

On a cold runner tool every shot leaves a runner behind. Ground and mixed back in, it saves money until the ratio crosses the limit your buyer allows. Zoho Inventory holds regrind as its own item per polymer and colour, and the Creator log records how much went back into each job.

  • Zoho Inventory
  • Zoho Creator (custom)
Hold: short shot, cav 3212 pcs held · Sample

Step 5 · Inspection

First-off, patrol and final checks before parts move

The first shots after a mould change are checked against the part spec; then a patrol inspector checks every few hours. Rejects get a defect code, and suspect lots move to a hold location in Zoho Inventory so they cannot be picked by mistake.

  • Zoho Creator (custom)
  • Zoho Inventory
Box 14 of 20500 pcs each · Sample

Step 6 · Packed to customer

Counted into boxes, labelled and invoiced

Parts are packed in the quantities the buyer specifies, usually by count or by weight. The packing list in Zoho Inventory becomes the GST invoice and e-way bill in Zoho Books, and returnable crates or trays sent with the goods are tracked so they come back.

  • Zoho Inventory
  • Zoho Books
  • Zoho CRM

Shot weight and material consumption

How much resin does an order really consume?

Part weight times quantity is only the start. Each shot also makes a runner, start-up and purge shots are thrown away, and some parts are rejected. Put in a sample order to see the estimate; in Zoho these come from the part spec, and actual issues from the shift log.

Estimate only · Sample inputs

Shots needed
10,300
Material through the barrel
539.7 kg
Runners to the grinder
65.9 kg
Regrind fed back into the mix
79.7 kg
Fresh resin to buy
460.0 kg

Shots = parts ÷ cavities, plus the allowance. Barrel material = shots × (part weight × cavities + runner). Regrind fed back is the smaller of two figures: runners plus ground rejects, or your limit as a share of barrel material. Masterbatch and drying losses are left out to keep it simple.

Choosing the system

Should a moulder use Tally and sheets, Zoho with Creator, or plastics MES software?

Tally and sheets cost little and hide a lot. Zoho with a Creator app brings resin, regrind, moulds and money into one place without machine connectivity. Plastics MES software watches each press live, and usually still needs an ERP beside it. Choose a row to mark it.

Three options for running a plastic injection moulding plant
Point Tally and sheetsToday in many plants Zoho and CreatorBusiness system plus moulding logsUsual fit for 8 to 60 presses Plastics MESMachine-connected
Resin, masterbatch and regrind stockMonth-end countSeparate items, issued per jobOften only consumption
Live cycle time per pressNoNot native; shift totals onlyCore purpose
Mould change and maintenance logNotebookCreator log per mouldVaries by product
Customer-owned mould registerRarely keptCreator registerRarely included
Buyer schedules and quotesEmailZoho CRMNot its job
Invoices, e-way bills, returnable cratesInvoices yesZoho Books and InventoryNeeds an ERP
Hardware on the pressesNoneNone needed to startSensors or controller links

Production week

What does a planned week look like across the presses?

One row per press, one column per day. Jobs, colour changes, mould changes and maintenance each have their own colour, so the planner and sales both see when a part will run. This Sample week is a Creator calendar over the shift logs.

PressMonTueWedThuFriSat
P1 · 80 tClip, natural PP · 3 daysColour change to blackClip, black PP
P4 · 150 tMould change M-118Fan grille, ABS · 4 daysPlanned maintenance
P7 · 250 tSwitch housing, PCMould change M-204Meter cover, PC · 3 days
P9 · 450 tBumper bracket, PP talc-filled · full week
  • Production job
  • Colour change
  • Mould change
  • Maintenance

Regrind, colour and mould ownership

Whose mould is on press 7, and how much regrind went into its parts?

Two questions most moulders answer from memory. Regrind and colour tracking keeps ground material separate by polymer and colour, and the mould register records who owns each tool, where it is, its shot count and when it was last serviced.

Regrind bins, Sample

PP natural144 kg · usable in natural and light colours
PP black76 kg · black parts only
ABS white110 kg · capped at 10% by buyer drawing
PC clear24 kg · not allowed in optical parts

Mould register, Sample

Sample register of moulds in the plant
MouldOwnerShotsNext service
M-118 grille, 2 cavCustomer, appliance maker412,000At 450,000
M-204 meter cover, 4 cavCustomer, meter maker96,500At 150,000
M-033 clip, 16 cavOur own2,310,000Overdue
M-251 bracket, 1 cavCustomer, auto tier-258,000At 100,000

Who you mould for

What changes when you mould for auto, appliance or packaging buyers?

Buyers decide the paperwork, the packing and how strictly regrind is limited. These are the groups Karnataka moulders most often supply, with the setup each one tends to need.

Interior trims, brackets and under-bonnet parts

Suppliers feeding assembly plants around Bidadi and further afield work to weekly call-offs, filled and talc-filled grades, and strict labelling. Part approval topics such as PPAP sit with your quality team.

  1. Schedule
  2. Material lot
  3. Mould
  4. Inspect
  5. Labelled bins

Auto suppliers in Bangalore on Zoho

  • Usually fitsZoho CRM, Inventory with batches, Books, Creator
  • Key setupMaterial lot on every dispatch label
  • Watch forRegrind limits set per part by the buyer

Part spec sheet

What goes on the part master before the first order runs?

Everything that turns an order into material, machine time and packing: polymer, colour, weights, cavities, cycle, press size and pack quantity. In Zoho this is the item record plus a Creator spec form, laid out here like the title block of a drawing.

PartMeter cover, top
Part no.MC-204-T
RevC
PolymerPC, UV grade
ColourSmoke grey, masterbatch 2%
Part weight11.5 g
Runner6.4 g per shot
Cavities4
Cycle28 s
Press250 t
Regrind cap10%
Pack500 per carton
MouldM-204, customer-owned
Title block · SampleElite Tech Corp demo plantApproved by: process engineer role · Sheet 1 of 1

Rejection Pareto

Which few defects cause most of the rejected parts?

Usually two or three. Sorted by count with a running total, a month of reject codes from the shift log shows where an hour of process work saves the most material. The chart below is Sample data for one plant.

  1. Short shot1,140
  2. Flash at parting line780
  3. Sink marks450
  4. Silver streaks, moisture270
  5. Colour variation210
  6. Warpage150

Sample month: 3,000 rejected parts. The right-hand figure on each bar is the running share of all rejects.

Licence cost

What do the Zoho licences come to for a moulding plant?

A plant on Zoho Inventory Premium and Zoho Books Professional pays ₹2,299 plus ₹1,499 per organisation per month, billed yearly, plus GST, at Zoho's India list prices. Creator seats for the shift log are charged per user. Pick a plan below to work out yours.

Prices read from Zoho's India pricing pages in November 2026 and rechecked before purchase; Zoho bills them directly. Implementation is one fixed fee agreed in a signed scope.

Connections

Which systems and devices does the moulding plant's Zoho link to?

Buyers on one side, presses and scales in the middle, accounts and payroll on the other. Every link is labelled Native, Marketplace or Custom before the scope is signed, so nothing is assumed.

Buyers

Orders and complaints

  • Schedules from buyer emails or sheets imported to sales orders Native
  • Buyer portals or EDI Custom
  • Quality complaints as Zoho Desk tickets linked to the dispatch Native
  • Buyer calls dialled and logged through supported telephony providers Marketplace

Plant

Counts and weights

  • Shift log and mould changes in a Creator app on tablets Custom
  • Press shot counters through Zoho Catalyst, where the controller exposes them Custom
  • Counting scales at packing Custom
  • Barcode labels on cartons from Zoho Inventory Native

Accounts and people

Money and wages

  • IRN e-invoices with e-way bills generated in Zoho Books Native
  • Returnable crate challans in Zoho Books Native
  • Shift workers' payroll with PF, ESI and Karnataka PT in Zoho Payroll Native
  • Tally history for opening balances Custom

Rollout path

How does a moulding plant switch to Zoho while presses keep running?

Material first, because resin is the biggest cost. Then the shift log on two presses, then the rest. The signed scope carries the dates; here is the usual sequence.

  1. 1Trace one partFrom resin bag to packed carton with your planner, writing down every register touched.
  2. 2Material itemsResin grades, masterbatch, regrind by colour and packing material set up in Zoho Inventory.
  3. 3Part specsWeights, cavities, cycle and pack quantity entered for the parts that run most.
  4. 4Two-press pilotThe Creator shift log and mould change log tried on two presses for a fortnight.
  5. 5All presses and shiftsShift leads trained at the plant in Kannada or English; office team in any of our four languages.
  6. 6Month-one numbersResin issued against parts made, regrind ratio and reject Pareto reviewed together.

Fit finder

Which Zoho apps does your moulding plant need?

Four quick questions. You get a suggested app list and a licence estimate at India list prices, and you can send the result to us with one click so the first call starts from your answers.

Around Bengaluru

Do you visit moulding plants in Jigani, Peenya or Harohalli?

Yes, by appointment. We start with a walk along your presses and the resin store, train shift leads on site, and run the rest on video calls. Meetings in the city happen at our office at #39, 8th Main Road, Vasanth Nagar.

Jigani and Bommasandra

Dense moulding belt for appliance, electrical and auto buyers toward Hosur Road. Close to Electronic City units on Zoho.

Peenya and Nelamangala

Older moulders and tool rooms side by side, which is handy when a mould needs repair. Read Zoho for Peenya plants.

Harohalli, Bidadi and Dobbaspet

Newer KIADB areas where larger presses and auto supply plants have moved for space.

Mysuru, Tumakuru and Hubballi-Dharwad

Moulders near regional OEMs, supported over video with planned visits; see Tumakuru.

KSPCB consent conditions, plastic waste rules and factory licences are for your plant team; Zoho can store the documents and renewal dates if you want them in one place.

Client feedback

What do clients say after a Zoho project with us?

Published reviews from our clients in different sectors. Moulding clients' names and parts stay private.

The team at Elite Tech Corporation is highly knowledgeable and extremely supportive. They took the time to understand each of our business use cases in detail and approached every requirement with a strong implementation mindset.
KVP EnterprisesFounder and CEO · manufacturing automation
What stood out most was their structured approach, clarity in communication, and commitment to aligning technology with practical, on-ground operations rather than offering generic solutions.
MegawinFounder and CEO · multiple Zoho applications
Your understanding of our requirements and customization of Zoho Books have positively impacted our operations. The successful implementation of APIs and workflows has streamlined processes.
F Care GroupFounder and CEO · Zoho Books, APIs, workflows
TrukkingLulu HolidaysMegawinJADKingsSygaardJemkonBrealantRockolyLendonRohealthTengani

FAQ

Injection moulding ERP questions

Resin, regrind, moulds or shift logs: ask away. If an MES or a larger ERP suits your plant better, you will hear it from us.

Book my free Zoho fit assessment
Can Zoho work as an ERP for a plastic injection moulding company?

Yes, for the business side of the plant. Zoho CRM handles buyers, schedules and quotes, Zoho Inventory tracks resin, masterbatch, regrind and finished parts, and Zoho Books does GST invoices and e-way bills. The shift log, mould change log and mould register are a custom Zoho Creator app we build. Zoho is not an MES and does not monitor presses live.

How does Zoho track resin consumption per order?

Each part has a spec with part weight, runner weight and cavities. Resin is issued from Zoho Inventory to the job, and the Creator shift log records shots made and rejects. From those, the system compares what the order should have used with what was actually issued, per job and per month.

Can we track regrind separately by polymer and colour?

Yes. Regrind is set up as its own stock item for each polymer and colour, for example PP natural regrind and PP black regrind. Grinding runners adds to it, and issuing it to a job reduces it, with the share used recorded against the job so buyer limits can be checked.

How do we keep a register of customer-owned moulds?

The Creator mould register records each mould's owner, location, cavities, shot count and service dates. Shot counts update from the shift log, and the register warns when a mould is due for preventive maintenance. When a customer asks for its tool back, the history is ready.

Can Zoho schedule our presses?

Not automatically. The planner decides which job runs on which press; the Creator calendar records the plan for the week and shows where actual output from the shift log falls behind it. Plants that need automatic scheduling or live monitoring usually add an MES beside Zoho.

Can Zoho read shot counts directly from our machines?

On some machines, yes, as custom work. Where the controller exposes counters, a gateway can send them to Zoho Catalyst and on to the Creator app. We check each press model during the plant visit before promising it; most plants start with shift-close entries on a tablet.

What do the Zoho licences cost for a moulding plant?

At Zoho's India list prices, Zoho Inventory Premium is ₹2,299 per organisation per month billed yearly, Zoho Books Professional ₹1,499 per organisation per month billed yearly, and Zoho Creator Standard ₹480 per user per month billed yearly, all plus GST. We price our own setup work once, as a fixed figure in the scope you sign.

Will shift operators use tablets on the shop floor?

Most do when the screen is short: press, mould, shots, rejects and a reason. We train shift leads at the plant in Kannada or English, and office staff in English, Tamil, Kannada or Malayalam.

Does this help with plastic waste or pollution board paperwork?

Zoho can store your consent documents, waste records and renewal dates, and remind the right person before they lapse. What the rules require and whether the plant meets them is for your plant head and compliance adviser to judge.

Moulding shop review

Book your free Zoho fit assessment for the moulding shop

Tell us how many machines you run, which polymers you buy and how resin stock is counted today. We reply within 1 business hour. No obligation.

  • We follow one part number from resin bag to packed box with your planner
  • You see which records are standard Zoho and which need a Creator app
  • Meet at your plant, at Vasanth Nagar or on a video call

Tell us about your business

Three short steps. Fields marked * are required.

Your need
Your company
How we reach you

Privacy notice. We collect the details in this form (name, business email, phone, company, city and your requirement) only to reply to your enquiry and arrange the assessment. They are stored in Zoho CRM, the system we use to manage enquiries, and are never sold or used for advertising. The updates box is optional and you can withdraw it at any time. To see, correct or delete your details, or to withdraw consent, call +91 89259 24785 or message us on WhatsApp. Read our privacy policy.